Challengers Free Conference call bridge available 24x7
This entry was posted on 2/22/2007 2:13 PM and is filed under Tips and technical,Leaders.
Free Conference Call Dial-in Number: (616) 347-8400 Host Access Code: 847037* Participant Access Code: 847037#
Free Conference Recording Subscriber PIN code: 721739# To start recording, host hits: *9, then the PIN To stop and save the recording, host hits: *9
Free Conference Play Back Playback Number: (641) 715-3415 Access Code: 847037#
Our free conference call bridge is always available. you do not have to reserve it Note: This account is good for 120 days. Issue date: June 2 2008 5:42:56 PM. As an option you can record the call and I can post the audio file on the website or we could probably even do a pod cast if you want. You can set up your own bridge too. It is free.
Enjoy. Jim E
From: services@freeconferencecall.com [mailto:services@freeconferencecall.com]
Sent: Thursday, February 22, 2007 9:33 AM
To: jim@ensigns.us
Subject: FreeConferenceCall Account Information
| Thank you for registering with FreeConferenceCall.com
|
A 96 caller automated 24x7 reservationless conference call account with free recording has been activated for you at FreeConferenceCall.com. You can now conduct audio conference calls anytime without a reservation with the added benefit of recording your conference calls for free! This is not a limited time offer however you must re-register in 120 days. We recommend that you print this email for your records.
|
|
|
|
Instructions
|
|
| When using your free live conference call number you must notify your callers by giving them the date, time, dial-in number and access code. All parties will use the same dial-in number and enter the same access code, followed by the * or # key as specified below.
Host: When prompted, enter the assigned access code, followed by the * key.
Participant: When prompted, enter the assigned access code, followed by the # key.
Once connected to the live conference, every caller will be able to talk. Every caller will also have access to the touch tone commands listed below.
Recording Instructions
During the free live conference, the host can start recording at any time by pressing *9. The system disconnects him/her from the free live conference and prompts for the Subscriber PIN. If the Subscriber PIN is valid, the host is returned to the conference and all attendees are notified that the recording option has been started. To stop the recording, the host will press *9 again.
Play Back Instructions
To listen to the recorded conference, the host must provide attendees with the play back number and access code. Please note, this number is different from the conference dial-in number. When users call into the recording playback number, they will be prompted to enter the access code. Once confirmed, the system will play back the recorded conference. During play back, the user can scroll forward or backwards through the recorded conference. You will find the play back features below. |
Features by Caller
|
To access the different Feature Keys when in a call, simply press the corresponding key below - it is not required that a caller enters a star (*) or pound (#) key before or after the feature key.
|
|
| Exit - exit the call
|
|
| Instructions - conference instructions
|
|
| Mute/Unmute - caller controlled muting |
| Host Feature Keys(Accessed by following the Access Code with a * instead of a #) |
|
| Count - plays the number of parties in the call
|
|
| Exit - exit the conference call
|
|
| Instructions - conference instructions
|
|
| Listen only modes - host controlled muting
|
|
| Mute/Unmute - caller controlled muting
|
|
| Secured/Unsecured - stops callers from entering
|
|
| Tone controls
|
|
| Record Conference |
|
| Rewind 30 seconds
|
|
| Fast forward 30 seconds
|
|
| Pause/resume playback |
|
|
| Touch Tone Command Explanations
|
Caller count - 2 key (Host only)
Allows the host to get a count of how many callers are on the code.
Exit conference - 3 key
Pressing 3 Takes the individual user out of the conference call and back into the lobby.
Instructions - 4 key
Plays a menu of touch tone commands.
Listening modes - 5 key (Host only)
There are 3 different listening modes for the audience – the default mode is open conversation – pressing 5 once will mute the audience however the audience can un-mute them selves by pressing 6 for questions or guest speakers – pressing 5 again will put the audience into mute mode with out the capability of un-muting themselves – press 5 again and it will return you to open conversation mode.
Mute - 6 key
Pressing 6 will mute the line of the individual caller pressing 6 – pressing 6 again will un-mute the line.
Security - 7 key (Host only)
Pressing 7 will secure the conference and block all other callers attempting to enter the conference – pressing 7 again will re-open the conference to all caller joining.
Tone control - 8 key (Host only)
The default setting is Entry and Exit tones on – pressing 8 once and you will hear entry and exit tones off, press 8 again and you will hear Entry tone off exit tone on, press 8 again and you will hear entry tone on exit tone, pressing 8 one more time will put you back in default mode with both exit and entry tones on.
Record Conference - 9 key (Host only)
Pressing 9 once will disconnect the host from the conference and prompt for the Subscriber PIN. When the Subscriber PIN is validated, the host is returned to the conference and an announcement is made to the attendees that the conference is being recorded. To stop the recording, press 9 again. |
|
